AUTOMOTIVE MOTORCYCLE

No one likes car trouble – especially when it comes to doing tune up. Raise your hood and you can quickly see it’s not a place for anyone but an expert. However, after years of working on tune ups, I found today’s motors seldom need a tune up.

What usually happens is a little bit of carbon-buildup spread around the fuel, combustion, oiling and hydraulic valve and lifters, all combine to reduce power, cause rough idle, tapping noise, lousy fuel economy, and smelly exhaust problems.

When the motors computers tries to make adjustments, results are confusing, and usually runs the fuel in a richer mixture as a best remedy.

Properly cleaning of those dirty systems using special cleaning and friction modifying chemistry is called for.

After cleaning and friction reducing – which restores free movement and function to every internal part, and this restores proper breathing and combustion, the computer will re-tune the settings on-the-fly – meaning, as you drive along, to a best-ever setting. Does this make sense to you?

This following describes how to do a professional fuel injector service and the ideal products to order and use.

A product I use successfully to clean fuel injectors, eliminate rough idling, loss of power, end valve tap – all a common cause of all of the above problems, is called, the Mega Power Worn Motor Treatment.

Its simplicity of use and instant results shows it to be a great invention. It will help restore the motors performance and get the job done right.

If you can add oil to the motor you can do this.

Basically, you split cleaning of the motor into two sections. There is a top-side cleaning – using 3 different cleaners. 1- Add a gas tank cleaner to the fuel tank. 2- Add a valve cleaner to the oil. 3- Add a combustion cleaner into a vacuum line like the PVC valve. This cleans the top side of the motor. I will WALK YOU THROUGH THE PROCEDURE, and make it easy for you to clean the fuel injectors, and other motor systems, for pleasing results..

This is followed by a bottom-side, or oil side cleaning, using 3 more products. One in the dirty oil which is replaced during oil change, and two added to the new oil. Hundreds of car owners – not just mechanics have followed this method to solve their motor problems – and saved themselves hundreds of dollars.

Every car owner is going to experience a flat tire sometime in their lifetime. Instead of waiting until it happens, you’re probably going to want to make sure that you prepare for the worst. This is something that many people do and that is waiting until it actually happens!

In order to prevent a flat tire, there are some products that you can use in order to fix it. While you can’t really prevent a tire from getting flat, you can always have something handy that can at least fix it. Keep in mind that a serous blow out can’t be stopped and there’s literally nothing you can do to fix it more than likely.

When looking for a fix a flat product, there are a few things that you’re going to want to look out for. The first thing that you’re going to want to look out for are the reviews. Trust me, there are a lot of those “as seen on TV” junk products that don’t do anything but brainwash you. This is something that you don’t want.

Second, you’re going to want a product that works. Don’t just trust your Dad when they tell you that a product worked for them. You’re going to want more than one opinion. This is why I would recommend that you check out the Internet to get all the reviews that you can get.

Upon doing some research online, I found a few products that tend to have a lot of great reviews from many people. Since most tires are the same, the products listed below should be a great investment. There’s no reason to spend more than $25 on a fix a flat products.

• #1 Fix a Flat – This is an inflator that is more like a spray. You spray it on smaller leaks to stop them. This is more of a temporary solution more than anything.
• #2 Slime 60090 – Slime is known for making many great tire products. This product is just like the Fix a Flat. Just make sure that you compare both of the, because they are different in a few ways.
• #3 Slime Smart Repair – This is a more advanced kit. It’s only going to cost you around $22 but you’re going to find that it does a little better job than the spray. This comes equipped with a portable inflator as well as a spray.

AC problems in vehicle are one of the major issues. This problem may occur due to several reasons. Refrigerant leak is the foremost reason of this problem. If refrigerant is leaking from any components located at different areas, it can cause severe problems.

It is not an easy task to replace Cars AC, because its components are not present as one unified unit like home window AC. But, some considerations are there which can help owners like:

• Finding actual signs of leaks

As mentioned above that refrigerant is an important component of an AC. So, first step is to find out the sign of refrigerant leak. In some systems, this component is present as UV dye which is neon yellowish green in color. It can be seen easily with the help of naked eye. All components, service fittings and hoses are needed to check thoroughly. By following the lines of fittings, it is easier to find out the exact location of leakage.

The condenser is an important part of car. It is usually located at the front side of the radiator. One needs to check the sign of any leakage nearby condenser. Most of the times, condenser may be found leak without getting any hit. Thus, if leaks are found at right time, it can save effort and huge amount of money as well.

• Use of Leak Detectors

After, the reason of leak has been detected; another step should be its proper treatment. Refrigerant leak detector can help in this regard. There is a Freon leak detector which can help one to detect a small leak as well. Some components are not easy to detect with naked eye, so with the help of electronic leak detector, such leaks can be find out at ease. But, one thing should be kept in mind that water may not enter into the leak detector otherwise it may get damaged.

How long do hydraulic hose assemblies last? There is no answer to how long you should wait before replacing hose assemblies on your equipment. The good news is that there are signs that you can look for to determine when it’s time for preventive hose assembly replacement.

Do not use a old or worn hose assembly on your equipment.

The Society of Automotive Engineers (SAE), proclaims the shelf life of bulk rubber hose is 10 years from the date it was manufactured. The manufactured date should be located on the lay line of the hose. If it’s close to 10 years. It shouldn’t be used. The purchase of a new hose assembly is by far less expensive than the clean up and potential harm and injury if an old hose breaks or blows.

Make and follow a regular preventative hose maintenance schedule.

For most assemblies, a visual inspection once every 30 days and replacement of assemblies every year or two is adequate. Eighty percent of blown hoses are caused by external damage through kinking, crushing, or abrasion of the hose and can normally be seen by just a quick look.

Keep a log of the hose replacements, especially replaced hose failures. You can use this log to estimate how long your hoses may last in your equipment. But nothing will replace a visual inspection.

Critical hose assemblies should be replaced more often as these will cause the most damage if blown. Critical assemblies may be those that are close to the operators or failure could result in injury or would cost a great amount of damage.

Replace your assemblies if you see oil leaking around fittings or along the hose, crushed hoses, abrasion or any exposed wire is a sure sign of need for replacement, any significant damage to the outer cover, twisted hoses, Kinks, cracked, rusted, or corroded fittings.

Auto scan tool is a very practical tool why? This is because it can let you save money through the elimination of the unnecessary stays to the mechanic and the company that produced the car. Indicator light tells your vehicle and normally flashes more than normal especially if you are profiting more. Another reason why is it so practical to have an auto scan equipment is because the monitoring system which turn the light on is very sensitive. To give you guidelines, here are some of the reason why you must have auto scan tool.

For those car owners in America and the neighboring town and cites must understand that the government is being serious in implementing environmental laws and the use of this device is strictly mandatory. The main function of this tool is to minimize the emission of the vehicle. The search engine light normally informs the driver that the code is saved in the auto scan memory. The code often shows the engine malfunctions and sometimes serious engine problems. By having an auto scan tool your question to this will be answered. If the indicator light is on, you have to know what would be the possible problem it has. You also have to check the meaning of the codes displayed to solve the trouble.

Having this device will also help you cut down your diagnostic costs. One of the first things that car owners do when they notice a malfunction is to bring their cars in the mechanic. And the first things that most mechanics do in a car shop are to connect the car in a scanner. With this case, you will be charge a diagnostic cost and this charge can be prevented if you purchase your own scanner. What is worse is when you have to visit the mechanic for many times. This will really costs a lot. It is fine if the indicator light will remain activating if your personal auto scan tool for the reason that you need not go somewhere else seeing as you can just pact with it, in the ease of your own home.